NFPA 25 inspections that keep you compliant and covered
Massachusetts requires your sprinkler system to be inspected and tested on a schedule. We handle the quarterly, annual, and five-year work, test the standpipes, fire pumps, and other equipment that feed it, document it the way AHJs and insurers want to see it, and tell you what needs attention before it becomes a violation.
The record matters as much as the test
An inspection is worth what you can show for it. We run the NFPA 25 checks at the riser, then document them the way AHJs and insurers want to see them.
That paperwork is what stands behind your certificate of occupancy and your insurance. We tell you what needs attention before it becomes a violation, rather than handing you a report and leaving you to work out what it means.
What gets checked, and how often
NFPA 25 sets the frequencies. Miss one and a failed inspection can affect your certificate of occupancy and your insurance. Here is the cadence we keep you on.
Quarterly
We check gauges, valves, and alarm devices, verify supervisory signals, and confirm control valves are in their correct position and properly secured.
Annual
A full system inspection: main drain test, alarm and waterflow test, antifreeze concentration check, and a hands-on look at heads, hangers, and piping.
Five-Year Internal
We open the piping to inspect the inside for obstruction, corrosion, and scale, and service the check valves and standpipe components that require it.
Obstruction Investigation
When an internal inspection turns up foreign material or corrosion product, we investigate the extent so a blockage does not stop water from reaching a fire.
The rest of your water-based fire protection, tested too
A sprinkler system is only as good as the water supply behind it. NFPA 25 also covers the standpipes, pumps, valves, and connections around it, and we test each on the schedule NFPA 25 sets for it, so one company keeps all of it current.
Standpipe Testing
Flow tests on standpipe systems to confirm the hose connections deliver the pressure and flow firefighters will need on every floor.
PRV Testing
Pressure-reducing valves on standpipe and sprinkler lines are flow tested so they open fully and hold the outlet pressure they were set for.
Fire Pump Testing
Routine no-flow runs and the annual flow test, measuring the pump's output against its rated curve so a weak pump is caught early.
FDC Testing
We inspect the fire department connection for caps, swivels, gaskets, signage, and clear access, and test the FDC piping when it comes due.
Backflow Testing
Backflow preventers on the fire line are tested by our MassDEP-certified backflow tester, so the system cannot push water back into the public supply, with results documented for you.
Hydrant Testing
Private fire hydrants on your property are inspected and flow tested so they open, drain, and deliver water when the fire department connects.
How we run your inspection
A methodical visit, from the riser room to the report on your desk.
Confirm the system and its history
We review what type of system you have, wet, dry, pre-action, or deluge, and pull the last inspection records so we know what was flagged and whether it was corrected.
Test the water supply and alarms
We run the main drain test to verify the supply, trip the waterflow and tamper alarms, and confirm they signal correctly to your monitoring so a real event actually reaches the fire department.
Inspect the system physically
We walk the system looking for corrosion, mechanical damage, painted or loaded heads, blocked spray patterns, leaking fittings, and hangers that have come loose.
Document deficiencies clearly
Anything that fails or is trending toward failure goes in the report with what it is and what it takes to fix it, so there are no surprises when the fire marshal reviews it.
File the report for the AHJ and insurer
You get a complete NFPA 25 report that meets 527 CMR 1.00 and is ready for your insurance carrier, and we set the reminder for your next due date so nothing lapses.
What Massachusetts building owners ask
Straight answers on frequency, code, and what a failed inspection means.
How often does my sprinkler system legally need inspection?
NFPA 25, adopted through Massachusetts fire code 527 CMR 1.00, sets it: certain checks quarterly, a full inspection and test annually, and an internal obstruction inspection every five years. The exact items depend on your system type.
What happens if my system fails an inspection?
We document the deficiency and give you a corrective scope. Left uncorrected, it can lead to a fire-code violation and can give your insurer grounds to question coverage, so most owners have us fix it right away.
Do you handle the internal five-year inspection too?
Yes. We open the piping at the required points, inspect internally for obstruction and corrosion, and if we find material blocking flow we run an obstruction investigation to find how far it goes.
Can you take over inspections from another company?
We do that regularly. We review your last reports, pick up the schedule where it stands, and keep your quarterly, annual, and five-year dates on track from there.
Inspection overdue, or coming due?
Get on a schedule that keeps you compliant with Massachusetts fire code. We inspect and test systems across Eastern Massachusetts and respond within one business day.